Estamos actualizando el software de nuestra página web, en caso de encontrar alguna incidencia en el checkout, por favor pónganse en contacto en el número 672.03.24.48 y le daremos una solución rápida
MishimotoKit Intercooler altas prestaciones Ford Focus Rs, 2015+
Intercooler aluminio altas prestaciones específico para el modelo anunciado para Motorsport y alta demanda mecánica.
Diseñado para optimizar al máximo el caudal de aire
Gran ancho y mayor poder de refrigeración con un diseño núcleo especial para mínimas pérdidas de presión.
Ideal para coches de hasta 600 cv.
Reducciónde la temperatura del aire de admisión unos 10º con respecto a OEM.
Conexiones compatibles vávula bypass y blow off OEM
100% Aluminio con uniones y soldaduras TIG alta calidad
Especificaciones:
Cooler Overall Size 44" x 9.00" x 5.5"
Cooler Core Size 28" x 8.25" x 3.5"
Crash Bar Specs – Steel construction with black powdercoat – Application-specific mounting holes – 6.5 lbs
Hot-Side Intercooler Pipe Specs – Made from polished mandrel-bent aluminium – 2.25" I.D. – Includes upper and lower intercooler pipes
Cold-Side Intercooler Pipe Specs – Made from polished mandrel-bent aluminium – 2.75" I.D. – Includes upper and lower intercooler pipes
Purchase Includes (1) Bar-and-Plate Intercooler (1) Steel Crash Bar w/ Mounting Hardware (2) Hot-Side Intercooler Pipes (2) Cold-Side Intercooler Pipes (1) BPV Flange Adapter (1) Resistor Block Relocation Bracket w/ Mounting Hardware (2) Lower Intercooler Brackets w/ Mounting Hardware (1) Aluminium Overflow Can w/ Mounting Hardware (1) Turbo to Hot Pipe Coupler (for stock turbo) (1) Turbo to Hot Pipe Coupler (for aftermarket turbo) (1) 2.25" Straight Coupler (2) 2.75" Straight Couplers (1) 2.75" x 3.25" Long Straight Coupler (1) 2.00"-2.75" Transition Coupler (1) BPV Recirculation Hose (1) PCV hose (1) 2.00" T-bolt Clamp (4) 2.5" T-bolt Clamps (7) 3" T-bolt Clamps (1) 1.5" Worm-Gear Clamp (1) Bypass Valve Gasket (1) Black Nylon Hose Fitting, 3/4" I.D. (1) Black Nylon Tee Hose Fitting, 3/4" I.D. (1) 12" of Thermal Wrap
Note Mishimoto recommends that this intercooler kit, with or without the optional air intake, is not used with the stock ECU programming. It is highly recommended that the customer is able to retune the vehicleÍs ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.
This kit is rated for approximately 700 whp, or 30 psi of turbo boost. Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler.
This FMIC kit is not compatible with OEM fog lights.Cooler Inlet / Outlet 2.75" I.D. / 3.00" O.D.
Cooler Weight 25.5 lbs
Cooler Tank Wall Thickness 3.5mm
Cooler Construction Bar-and-plate with cast end tanks
Also Fits 02–07 Subaru WRX 04–07 Subaru STI 05–06 Saab 9-2x Aero
Engine Codes EJ205 EJ255 EJ257
Chassis Codes GD GG
Turbo to Hot-Side Hose Specs (for Stock Turbo) – 1.875" I.D. / 2.20" O.D. – On turbo outlet – 5mm hose thickness – Withstands up to 400°F (204°C) temps – Fits on turbos with 1.97" (50mm) maximum compressor outlet size
Turbo to Hot-Side Hose Specs (for Aftermarket Turbo) –2.00" I.D. / 2.40" O.D.–On turbo outlet – 5mm hose thickness – Withstands up to 400°F (204°C) temps – Fits on turbos with 2.25" (57mm) maximum compressor outlet size