MishimotoKit Intercooler altas prestaciones Carrera Mitsubishi Lancer Evolution 7/8/9, 2001-2007

MishimotoKit Intercooler high performance Carrera Mitsubishi Lancer Evolution 7/8/9, 2001-2007

MMINT-EVO-01K

MishimotoKit Intercooler High Performance Race Mitsubishi Lancer Evolution 7/8/9, 2001-2007

Color : Black
Out of Stock
€1,245.21
Tax included
PRODUCT AVAILABILITY: MOVING STOCK DAILY, ASK FOR AVAILABILITY BEFORE YOU PROCEED TO BUY IF YOU ARE IN A HURRY
Quantity

 

 

 

MishimotoKit Intercooler High Performance Race Mitsubishi Lancer Evolution 7/8/9, 2001-2007

Intercooler aluminum high performance specific for the model announced for Motorsport and high mechanical demand.
Designed to maximize air flow
Large width and greater cooling power with a special core design for minimal pressure losses.
Ideal for cars up to 600 cv.
Reduction of the admission air temperature about 10 degrees compared to OEM.
Compatible connections bypass and blow off OEM
100% Aluminium with high quality TIG unions and weldings
Specifications :

Cooler Overall Size
44" x 9.00" x 5.5"

Cooler Core Size
28" x 8.25" x 3.5"

Crash Bar Specs
Steel construction with black powdercoat
Application-specific mounting holes
of 6.5 lbs

Hot-Side Intercooler Pipe Specs
Made from polished mandrel-bent aluminium
– 2.25” I.D.
Includes upper and lower intercooler pipes

Cold-Side Intercooler Pipe Specs
Made from polished mandrel-bent aluminium
OF 2.75” I.D.
Includes upper and lower intercooler pipes

Buying Included
(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/ Mounting Hardware
Hot Side Intercooler Pipes
Cold Side Intercooler Pipes
BPV Flange Adapter
(1) Resistor Block Relocation Bracket w/ Mounting Hardware
(2) Lower Intercooler Brackets w/ Mounting Hardware
(1) Aluminium Overflow Can w/ Mounting Hardware
(1) Turbo to Hot Pipe Coupler (for stock turbo)
(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)
2.25" Straight Coupler
2.75" Straight Couplers
(1) 2.75" x 3.25" Long Straight Coupler
(1) 2.00"-2.75" Transition Coupler
BPV recirculation
The PCV Hose
(1) 2.00" T-Bolt Clamp
2.5" T-Bolt Clamps
3" T-Bolt Clamps
1.5" Worm-Gear Clamp
Bypass Valve Gasket
(1) Black Nylon Hose Fitting, 3/4" I.D.
(1) Black Nylon Tee Hose Fitting, 3/4" I.D.
(1) 12" of Thermal Wrap

Note
Mishimoto recommends that this intercooler kit, with or without the optional air intake, is not used with the stock ECU programming.It is highly recommended that the customer is able to retune the vehicleIS ECU after installing the intercooler kit.Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.

This kit is rated for approximately 700 whp, or 30 psi of turbo boost.Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler.

This FMIC kit is not compatible with OEM fog lights.Cooler Inlet / Outlet
2.75" I.D. / 3.00" O.D.

Cooler Weight
25,5 lbs

Cooler Tank Wall Thickness
3.5mm

Cooler Construction
Bar-and-plate with cast end tanks

Also Fits
0 0 Subaru WRX
04–07 Subaru STI
05–06 Saab 9-2x Aero

Engine Codes
BY EJ205
THE 255
THE 257

Chassis Codes
GD
GG

Turbo to Hot-Side Hose Specs (for Stock Turbo)
– 1.875" I.D. / 2.20" O.D. – On turbo outlet
5mm hose thickness
Withstands up to 400°F (204°C) time
– Fits on turbos with 1.97" (50mm) maximum compressor outlet size

Turbo to Hot-Side Hose Specs (for Aftermarket Turbo)
–2.00" I.D. / 2.40" O.D. – On turbo outlet
5mm hose thickness
Withstands up to 400°F (204°C) time
– Fits on turbos with 2.25" (57mm) maximum compressor outlet size

Intercooler pipe to throttle-body coupler specs
3.25" Length
OF 2.75” I.D.
3” O.D.
4mm thick

BPV Hose Specs
– Application-specific bend for this kit
– 1.25” I.D.
OF 1.50” O.D.
4mm thick

PCV Hose specs
– 17.5” length
OF 0.45” I.D.
OF 0.75” O.D.
4mm thick


intercoolers Mishimoto

 

: MMINT-EVO-01K
Out of Stock

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33