Español
English
Sachs Performance and coilovers.Suspension of high adjustable performance in height and hardness
.
General characteristics in the original language
Upside-down, monotube coilover suspension systems from ZF Sachs Race Engineering offer racing quality components for the road.
Greater ground clearance is needed in winter, while in summer and also for track use, it makes sense to lower the vehicle by 40 of 60mm.
In order to ensure sufficient spring path for these two different applications, special coilover suspensions were developed that allow the vehicle to be tuned for the respective operating mode.
These coilover suspensions are as superbly suited for heavy snow and ice conditions as they are for trackday and circuit use.
The Sachs Performance coilover suspension features 2 adjustment parameters, so rebound and compression damping can and varied via a dial with 20 clicks.
Damper characteristics can thus be simply and conveniently adjusted to meet individual requirements without dismantling the car’s wheel-end system.
The 20 stage adjustable damping allows drivers to adapt their suspension systems to specific driving surfaces, tyres and tyre pressures.This adjustment is achieved using a bypass on the piston for both rebound and compression.
Sachs Performance suspension kits are sold as complete boxed units and comprise the following:
2 x upside down front-axle monotube dampers with height and performance adjustment
2 x front-axle springs
2 x upside down rear-axle monotube dampers with height and performance adjustment
2 x rear-axle springs
The TÜV Certification
Sachs Performance suspension systems offer many advantages over the competition in terms of operation and building quality:
Operation
Adjustable rebound and compression forces via a bypass on the piston
Adjustment unit with precise gradation
- Suspension struts with an upside down design
- Continuously variable height adjustment within the range authorized by the TÜV
Height adjustment with trapezoidal threading for a long service life (very dirt resistant)
Optimized compression stops
Complete, ready to install solution
Quality
Optimized, high quality friction bearings and seals
High-grade, high-strength racing springs
OE-tested seal and friction bearing systems
OE Tested Piston Systems
Hardened, chromium-plated piston rods
High-grade corrosion protection
Advantages
Fast responsiveness
Broad Adjustment Range
Light Weight
Superb handling and ride quality
The Rapid Assembly
Low Cost Installation
All Sachs Performance suspension systems are extensively tested on the Nürburgring by Sachs’ highly qualified and experienced development engineers.
Achieving the perfect suspension setup is a complex operation.This is why we recommend that your Sachs Performance coilover suspension kit is installed by a suitably qualified and experienced person.
We have identified a trusted network of Sachs Performance Technical Centres, all of which are highly experienced and have fitted many suspension kits on our behalf. Sachs Performance coilover suspension kits are also available to buy through these Technical Centres.
.
Legalize your suspension with BBSport to pass ITV without problems
Depending on the interpretation of the ITV reform regulations that are made in each autonomous community, it is possible that the assembly of a roasted suspension is typed as a reform of importance.
In our company BBSport we can process the reform legalization process so that you don’t have any problems and pass the 100% guaranteed ITV.
If you want to hire this service, click this link and add the service to the cart along with the purchase of your BC Racing suspensions, you will benefit from a 30% of the price by acquiring it all together as a pack.
