Mishimoto Internal Cooling Pipe Kit Ford Mustang Ecoboost, 2015+
Mishimoto Kit Ford Mustang Ecoboost, 2015+
Mishimoto Kit Ford Mustang Ecoboost, 2015+
Cooler Overall Size
44" x 9.00" x 5.5"
Cooler Core Size
28" x 8.25" x 3.5"
Crash Bar Specs
Steel construction with black powdercoat
Application-specific mounting holes
of 6.5 lbs
Hot-Side Intercooler Pipe Specs
Made from polished mandrel-bent aluminium
– 2.25” I.D.
Includes upper and lower intercooler pipes
Cold-Side Intercooler Pipe Specs
Made from polished mandrel-bent aluminium
OF 2.75” I.D.
Includes upper and lower intercooler pipes
Buying Included
(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/ Mounting Hardware
Hot Side Intercooler Pipes
Cold Side Intercooler Pipes
BPV Flange Adapter
(1) Resistor Block Relocation Bracket w/ Mounting Hardware
(2) Lower Intercooler Brackets w/ Mounting Hardware
(1) Aluminium Overflow Can w/ Mounting Hardware
(1) Turbo to Hot Pipe Coupler (for stock turbo)
(1) Turbo to Hot Pipe Coupler (for aftermarket turbo)
2.25" Straight Coupler
2.75" Straight Couplers
(1) 2.75" x 3.25" Long Straight Coupler
(1) 2.00"-2.75" Transition Coupler
BPV recirculation
The PCV Hose
(1) 2.00" T-Bolt Clamp
2.5" T-Bolt Clamps
3" T-Bolt Clamps
1.5" Worm-Gear Clamp
Bypass Valve Gasket
(1) Black Nylon Hose Fitting, 3/4" I.D.
(1) Black Nylon Tee Hose Fitting, 3/4" I.D.
(1) 12" of Thermal Wrap
Note
Mishimoto recommends that this intercooler kit, with or without the optional air intake, is not used with the stock ECU programming.It is highly recommended that the customer is able to retune the vehicleIS ECU after installing the intercooler kit.Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.
This kit is rated for approximately 700 whp, or 30 psi of turbo boost.Exceeding these horsepower or pressure limits may require a custom-sized front-mount intercooler.
This FMIC kit is not compatible with OEM fog lights.Cooler Inlet / Outlet
2.75" I.D. / 3.00" O.D.
Cooler Weight
25,5 lbs
Cooler Tank Wall Thickness
3.5mm
Cooler Construction
Bar-and-plate with cast end tanks
Also Fits
0 0 Subaru WRX
04–07 Subaru STI
05–06 Saab 9-2x Aero
Engine Codes
BY EJ205
THE 255
THE 257
Chassis Codes
GD
GG
Turbo to Hot-Side Hose Specs (for Stock Turbo)
– 1.875" I.D. / 2.20" O.D. – On turbo outlet
5mm hose thickness
Withstands up to 400°F (204°C) time
– Fits on turbos with 1.97" (50mm) maximum compressor outlet size
Turbo to Hot-Side Hose Specs (for Aftermarket Turbo)
–2.00" I.D. / 2.40" O.D. – On turbo outlet
5mm hose thickness
Withstands up to 400°F (204°C) time
– Fits on turbos with 2.25" (57mm) maximum compressor outlet size
Intercooler pipe to throttle-body coupler specs
3.25" Length
OF 2.75” I.D.
3” O.D.
4mm thick
BPV Hose Specs
– Application-specific bend for this kit
– 1.25” I.D.
OF 1.50” O.D.
4mm thick
PCV Hose specs
– 17.5” length
OF 0.45” I.D.
OF 0.75” O.D.
4mm thick
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
Size | S | M | L | XL |
---|---|---|---|---|
Men | 7-10 | 10-13 | 13-15 | 15-17 |
Women | 7-9 | 10-12 | 13-14 | 15-16 |