Audi RS 6 Avant (C8) 2020-2023 Akrapovic EV - Evolution ECE Type Approval

Audi RS 6 Avant (C8) 2020-2023 Akrapovic EV - Evolution ECE Type Approval

S-AU/TI/15H

Audi RS 6 Avant (C8) 2020-2023 Akrapovic EV - Evolution ECE Type Approval

Out of Stock
9.728,47 €
Impuestos incluidos
DISPONIBILIDAD DEL PRODUCTO: VARIABLE A DIARIO, CONSULTAR DISPONIBILIDAD PREVIAMENTE A LA COMPRA
Cantidad

  Política de seguridad

(editar con el módulo de Información de seguridad y confianza para el cliente)

  Política de entrega

(editar con el módulo de Información de seguridad y confianza para el cliente)

  Política de devolución

(editar con el módulo de Información de seguridad y confianza para el cliente)

Audi RS 6 Avant (C8) 2020-2023 Akrapovic EV - Evolution ECE Type Approval

Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes

A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system

Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the exhaust pulses from both sides of the engine

The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system

Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble

The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise

Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 20% against the stock system

This is an ECE compliant system that is a serious performer in all areas

Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces

To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish.The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H

The system is split into two codes because of packaging requirements.If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed

In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.ECE type approval is only valid for cars equipped with otto/gasoline particulate filter. The exhaust system is compatible with original Audi trailer hitch

: S-AU/TI/15H
Out of Stock

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

  • Paste the label on a flat surface on the package
  • Make sure that both 1D and 2D barcodes are clearly visible
  • Ensure that the label is smooth and isn’t creased or wrinkled
  • Check for any tears, dents, holes or scratches
  • Pack your product tightly, with the right size packaging
  • Ensure both barcodes are on a flat surface of the package
SizeSMLXL
Men 7-10 10-13 13-15 15-17
Women 7-9 10-12 13-14 15-16

Example Shown : SIZE XL, Hem to Hem 84cm OR 33 ,SIZE L, Hem to Hem 84cm OR 33 ,SIZE M, Hem to Hem 84cm OR 33 ,SIZE S, Hem to Hem 84cm OR 33