How to set up BC Racing coilovers correctly, step by step

Correctly setting up a BC Racing coilover is essential to get the best performance, comfort and safety from your car. A poor set-up can affect stability, grip and tyre wear, while correct adjustment optimises the car's dynamic behaviour both on the road and on track.

At BBSport you will find BC Racing coilovers in every series with a search by car, live stock check and delivery across Europe.

See all BC Racing coilovers for your car

Below we explain step by step how to adjust a coilover, using technical but understandable terms, so that any user can follow it safely.

1. Preparation before adjusting

Before touching any component, make sure you have:

  • the right tools: a C-spanner, a height gauge, a jack and axle stands
  • a flat, stable surface: preferably a workshop or garage with a level floor
  • the BC Racing coilover manual: each model may have specific recommendations
  • a safety check: the car must be properly raised and supported on jacks or axle stands

Preparation is key to avoid accidents and ensure an accurate adjustment.

2. Ride height adjustment

Ride height is one of the main adjustments on a coilover. BC Racing lets you change the car's ride height using the threaded body and the adjustable spring collar.

Steps:

  1. Loosen the lower spring lock ring
  2. Turn the adjusting collar upwards to raise the ride height
  3. Turn the collar downwards to lower the ride height
  4. Measure the final ride height at all four corners to keep the car level

Tips:

  • Going too low can reduce suspension travel and compromise the geometry
  • For everyday use, a drop of 20-40 mm from the original ride height is recommended

3. Damping adjustment

BC Racing dampers let you adjust the compression and rebound stiffness. This controls how the suspension responds to bumps, corners and braking.

Steps:

  1. Locate the adjustment dial at the top of the damper
  2. Turn towards “+” to increase the damping (firmer suspension)
  3. Turn towards “-” to reduce the damping (softer suspension)
  4. Adjust progressively, testing the car after each change

Recommendations:

  • For everyday driving, keep the suspension soft for more comfort
  • For track or sporty driving, increase the stiffness to improve stability and control

4. Spring preload adjustment

Spring preload affects the initial behaviour of the suspension and the car's response.

Steps:

  1. Loosen the lock ring
  2. Turn the upper spring collar to increase the preload
  3. Turn it the other way to reduce the preload
  4. Check that the car keeps level and has adequate travel

Important: too much preload can make the suspension too stiff and reduce comfort, while too little preload can cause excessive bouncing.

5. Camber adjustment (optional, depending on the model)

Some BC Racing kits let you adjust the wheel camber with adjustable top mounts.

Steps:

  1. Loosen the bolts of the top mount
  2. Move it to change positive or negative camber
  3. Measure the angle with a gauge or go to a specialist workshop
  4. Adjust progressively until you get the desired angle

Recommendation: a little negative camber improves cornering grip without excessive tyre wear.

6. Final check and testing

After adjusting ride height, damping, preload and camber:

  1. Check that all bolts and nuts are correctly tightened and locked
  2. Lower the car and check that it is level at all four corners
  3. Do a gentle test drive to assess body roll, bouncing and comfort
  4. Make small changes according to the handling feel and intended use

Tip: having a full wheel alignment after any adjustment is essential to keep the correct geometry and avoid tyre wear.

Conclusion

Setting up a BC Racing coilover correctly lets you optimise the car's ride height, damping and dynamic behaviour. By following these steps, you can adapt your car to:

  • everyday driving with more comfort
  • sporty driving or track days with maximum precision
  • better stability and cornering grip

Always remember to measure, adjust progressively and check the geometry with a professional wheel alignment. A well set-up suspension completely transforms the driving experience, making your car safer, more precise and more fun to drive.

Already know what you are looking for? Find BC Racing coilovers from every series for your model.

See all BC Racing coilovers for your car

Can't find your car or have questions? Message us on WhatsApp and we will confirm availability, price and lead time.

Contact us on WhatsApp

You can also search for coilovers by car model from the home page or by suspension brand in the brands menu.