AST Roll Cages roll bars for track days

catalogue

Trackday series

The Trackday series is mainly characterised by cages that can be approved for road use, that is, in principle they meet the requirements for driving on public roads; however, they need to meet certain fitting rules, so to avoid unexpected surprises we advise all users to check the conditions and requirements with an approval specialist or the vehicle inspection authority of their country (in Spain, the ITV stations of each region).

Find the AST Track Day cage for your car: 4-point rear roll bars and full cages, fixed or removable.

See AST cages for your car

In most cases they can be approved, but depending on the inspection station and the inspector, one may be stricter than another and more meticulous when assessing the project, so before assuming it can be approved, please check first with an approval specialist.

Within the Track Day Line series there are two groups:

Rear Cages & Full Cages

1- AST Rear Cages Track Day

Rear Cages are 4-point rear roll bars, recommended for vehicles whose users want extra safety to take part in sporting events, circuit practice sessions and track days without giving up everyday use of the vehicle.

In these cases, an approval specialist must be consulted to legalise the installation; with rear roll bars, the rear seats usually have to be removed from the registration.

All structures are supplied with the necessary reinforcement plates to be welded to the bodyshell, onto which the structure is bolted.

Within this group there are 4 different rear roll bar variants

Rear Cage Variant V1

4-point rear roll bar with bars designed to hold the harness belts. It has a single X in the rear hoop. Supplied with reinforcement plates to be welded to the chassis, onto which the structure is bolted.

AST TRACK DAY REAR CAGE V1

Rear Cage Variant V2

4-point rear roll bar with bars designed to hold the harness belts. It has an X in the main hoop and another in the rear hoop. Supplied with reinforcement plates to be welded to the chassis, onto which the structure is bolted.

AST TRACK DAY REAR CAGE V2

Removable Rear Cage Variant V1

4-point rear roll bar with bars designed to hold the harness belts. It has an X in the rear hoop. Supplied with reinforcement plates to be welded to the chassis, onto which the structure is bolted. Supplied with FIA-type removable joining tubes to make fitting and removal inside the cabin easier

AST TRACK DAY REAR CAGE V1 REMOVABLE

Removable Rear Cage Variant V2

4-point rear roll bar with bars designed to hold the harness belts. It has an X in the main hoop and another in the rear hoop. Supplied with reinforcement plates to be welded to the chassis, onto which the structure is bolted. Supplied with FIA-type removable joining tubes to make fitting and removal inside the cabin easier

AST TRACK DAY REAR CAGE V2 REMOVABLE

2 - AST Full Cages Track Day

Full Cages are 6-point roll cages: a complete structure covering the rear and front hoops, giving more complete protection to the driver and co-driver in an off or a rollover accident.

They can also be made road legal, but it is necessary to check first with an approval specialist to review compatibility with the regulations of your country or local inspection station.

Full Cage Variant V1

Basic 6-point roll cage with a rear diagonal bar and a horizontal bar to hold the harness belts. Supplied in two parts on a transport pallet so they can be taken into the cabin and joined together with FIA joining tubes. Supplied with reinforcement plates to be welded to the chassis, onto which the structure is bolted.

AST FULL CAGE TRACK DAY V1

Full Cage Variant V2

Basic 6-point roll cage with a rear X and a horizontal bar to hold the harness belts. Supplied in two parts on a transport pallet so they can be taken into the cabin and joined together with FIA joining tubes. Supplied with reinforcement plates to be welded to the chassis, onto which the structure is bolted.

AST FULL CAGE TRACK DAY V2

Full Cage Variant V3

6-point roll cage with 2 rear Xs, one in the main hoop and another in the rear hoop, and both horizontal bars to anchor the harness belts. Supplied in two parts on a transport pallet so they can be taken into the cabin and joined together with FIA joining tubes. Supplied with reinforcement plates to be welded to the chassis, onto which the structure is bolted.

AST FULL CAGE TRACK DAY V3AST Roll Cages roll bars for Trackday

Can't find your car or have questions? Message us on WhatsApp (+34 663 25 16 46) and we will confirm availability, price and lead time.

Contact us on WhatsApp

You can also search for roll cages by car model from the portada or by brand in the brands menu.