Roll bars are an essential element for our safety when practising motorsport, whatever the discipline we take part in.

At BBSport you will find AST roll cages and roll bars (road-legal Track Day and FIA), OMP and Sparco for your car, with a search by model.

See roll cages and roll bars See AST cages

Safety structures, now mandatory in competition vehicles taking part in official and/or licensed events, are designed to protect the occupants in accidents, particularly in a rollover or crash.

It is our lifesaver in a rollover accident

Safety structures, now mandatory in competition vehicles taking part in official events under FIA regulations, are designed to protect the occupants in accidents, particularly in a rollover or crash.

In cars that have to pass scrutineering they are mandatory and must comply with FIA Appendix J; at the end of this page you can access the link to the FIA regulations by clicking on "find out more".

In vehicles that regularly do track sessions or track days they are highly recommended, and in official competition they are mandatory to guarantee our own safety in accidents with or without a rollover; so we must be aware that even if they are not required at open track days, it is an accessory we should not overlook, because it is our lifesaver in an accident.

And it is not only for our safety: fitting roll bars also considerably reinforces the chassis, making it more solid and compact. The original chassis tends to have some flexibility to give the passengers ride comfort; if we drive on a circuit without roll bars, the chassis will be subjected to torsional forces and will gradually weaken.

FIA and track day roll bars

Types of roll bars

Within roll bars or roll cages there are 2 general groups:

  • Track Day roll bars, to fit to vehicles that will normally be driven on the road and must pass vehicle inspections

  • FIA roll bars, to fit exclusively to cars that will be driven off public roads, on circuits

  • Track Day roll bars

FIA roll bars

FIA roll bars are specially designed to comply with Appendix J of the FIA which is the regulation governing participation in official competitions; they cannot be approved for road use or vehicle inspection because their characteristics are different from those of track day roll bars.

There are several types depending on their configuration — 6-point, 8-point, multipoint — and each car model has a minimum configuration required by the FIA depending on the car's age and performance: the newer the car, the higher the minimum configuration requirements set by the FIA. This can be checked in each car's FIA homologation form.

They can also be supplied in two ways: as a kit for welding the bars, or pre-welded as two half-cages joined together with FIA-type tubular joints with bolts and self-locking nuts.

In any case, both types of bars must be anchored to the vehicle body by first welding the supplied reinforcement plates, made of steel at least 3 mm thick, to the vehicle chassis, so that the bases of the structure can then be fixed with bolts. The bars cannot be bolted directly to the vehicle floor, because it is not designed to withstand a rollover and could be pierced, injuring the driver and/or co-driver.

Minimum required configurations according to the FIA homologation form

Below is a table so that you know the minimum FIA configuration you will need for your car model according to its FIA homologation form

MOTORSPORT BOLT IN:

  • BOLT IN V1 3-door: Anterior a 01/01/2002
  • BOLT IN V1 5-door: Anterior a 01/01/2002
  • BOLT IN V2 3-door: Anterior a 01/01/2002
  • BOLT IN V2 5-door: Anterior a 01/01/2002
  • BOLT IN V3: from 01/01/2002 to 31/12/2005
  • BOLT IN V4: from 01/06/2006 to date

MOTORSPORT WELD IN:

  • WELD IN V1: Anterior a 01/01/2002
  • WELD IN V2: Anterior a 01/01/2002
  • WELD IN V3: from 01/01/2002 to 31/12/2005
  • WELD IN V4: from 01/06/2006 to date
  • WELD IN V4: from 01/06/2006 to date

MULTIPOINT WELD IN:

  • MULTIPOINT WELD IN V1: Anterior a 01/01/2002
  • MULTIPOINT WELD IN V2: Anterior a 01/01/2002
  • MULTIPOINT WELD IN V3: all dates or no FIA form
  • MULTIPOINT WELD IN V4: all dates or no FIA form
  • MULTIPOINT WELD IN V5: all dates or no FIA form

.

Main differences between track day and competition roll bars

Feature Track day roll bar Competition roll bar
Complejidad Baja High
Installation Atornillado Soldado
Number of bars Limitado Multipoint
Use of the vehicle Road + circuit Competition only
Regulatory compliance Not always mandatory Mandatory
Structural safety Good Very high

FIA regulations for roll cages

FIA regulations set out a series of technical requirements that safety structures in competition vehicles must meet.

The most important aspects include:

Homologated materials

Roll cages must be made of high-strength structural steels or chrome-molybdenum steel, capable of withstanding high loads during an impact.

The regulations also set minimum tube thicknesses and specific diameters depending on the type of structure.

Structural design

The regulations require a minimum bar configuration to guarantee the driver's safety.

Mandatory elements usually include:

  • main hoop behind the driver
  • rear reinforcement bars
  • side protection bars
  • diagonal braces

These bars work together to create a survival cell inside the cabin.

Mounting points

Roll cages must be fixed to the chassis by means of reinforced plates and specific structural points.

The regulations set:

  • minimum size of the mounting plates
  • material thickness
  • minimum number of mounting points

This ensures that the structure can correctly transmit the loads to the vehicle chassis.

Weld quality

In welded structures, the FIA requires the joints to meet strict quality criteria.

The welds must:

  • be continuous
  • no presentar grietas ni defectos
  • guarantee the structural strength of the whole

In many professional builds, these structures are made using specialist welding for high-strength steel.

Risks of using a non-homologated roll cage

Fitting a non-homologated roll cage can involve several risks:

  • Insufficient protection in a rollover
  • Structural failure during an impact
  • Rejection at competition scrutineering
  • Legal or vehicle approval problems

In addition, a badly designed structure can even increase the risk of injury if the safety distances inside the cabin are not respected.

Compatibility with seats and harnesses

Si planeas instalar:

  • Bucket seats
  • Competition harnesses

The roll cage must include a specific harness bar.

Which type of roll cage to choose

The choice depends mainly on how the vehicle will be used.

For track day cars

A rear roll bar or bolt-in structure is usually enough because:

  • It improves safety on the circuit
  • It allows part of the original interior to be kept
  • It is easier to fit
  • It costs less

It is a very popular option in sports cars that alternate between road and circuit use.

For competition cars

In vehicles designed exclusively for racing, the most advisable option is to fit a full homologated roll cage.

This ensures:

  • Maximum protection for the driver
  • Greater chassis stiffness
  • Compliance with competition regulations

These structures are common in disciplines such as rallying, drifting or circuit racing regulated by bodies such as the Fédération Internationale de l'Automobile.

Can't find your car or have questions? Message us on WhatsApp (+34 663 25 16 46) and we will confirm availability, price and lead time.

Contact us on WhatsApp

You can also search for roll cages by car model from the portada or by brand in the brands menu.