AST Motorsport Weld-In represent the highest level of preparation within the AST Roll Cages roll cage range. These structures have been developed for vehicles intended for competition, where safety, structural stiffness and compliance with FIA regulations are essential factors.

Unlike the bolt-in Bolt-In versions, Weld-In structures are supplied as a weld-in kit, allowing full integration with the vehicle body and achieving a higher level of chassis strength and stiffness.

What is an AST Motorsport Weld-In roll cage?

An AST Motorsport Weld-In roll cage is a safety structure designed to be welded directly to the vehicle body. Its purpose is to protect the occupants in an accident and reinforce the car's overall structure during intensive competition use.

These structures are common in disciplines such as rallying, hill climbs, circuit racing, time attack, autocross and other categories where the regulations require advanced protection systems.

Main features of AST Motorsport Weld-In

  • Specific design for each vehicle model.
  • Made of cold-drawn seamless high-strength E355 steel.
  • Configurations of 6 points or more.
  • Compatible with FIA Appendix J requirements.
  • Greater structural stiffness than a Bolt-In cage.
  • Prepared for fitting harnesses and HANS systems.
  • Designed for high-level competition.

Differences between AST Weld-In and AST Bolt-In

The main difference between a Weld-In and a Bolt-In structure lies in its fitting system.

AST Bolt-In

Bolt-In versions are supplied partially assembled and are fixed with bolts onto reinforcement plates fitted to the bodyshell. They are an excellent solution for amateur competition vehicles or projects that want to make future modifications easier.

AST Weld-In

Weld-In versions are delivered as a weld-in kit. All the tubes and reinforcements are integrated directly into the vehicle structure, achieving a permanent joint with the chassis and a higher level of stiffness.

For many competition teams, welded structures are the most advanced option within the AST Roll Cages range.

Advantages of a welded cage for competition

Full integration with the bodyshell brings important benefits in both safety and dynamic behaviour.

  • Increased torsional stiffness of the chassis.
  • Greater capacity to absorb and distribute loads.
  • Better precision of suspension and geometry.
  • Greater protection for driver and co-driver.
  • Configuraciones adaptadas a reglamentos FIA.
  • Greater potential for customisation and reinforcement.

Materials used in AST Roll Cages Motorsport Weld-In

AST Motorsport Weld-In structures are made of cold-drawn seamless E355 steel, a material widely used in competition for its excellent balance between mechanical strength, weight and energy absorption.

All components are designed specifically for each application to guarantee a precise fit and optimal integration in the vehicle.

Fitting process of an AST Motorsport Weld-In

Fitting a Weld-In cage requires professional experience and advanced welding knowledge. The vehicle must first be prepared by removing much of the interior to allow access to the mounting and reinforcement points.

Depending on the model, modifications may be needed to elements such as:

  • Salpicadero.
  • Moquetas.
  • Guarnecidos interiores.
  • Front and rear seats.
  • Heating and ventilation systems.
  • Elementos estructurales auxiliares.

For this reason it is recommended that installation be carried out by professionals specialised in competition vehicles.

AST Roll Cages certification and documentation

AST Motorsport Weld-In structures are initially supplied as a weld-in kit. Once the installation is complete, the manufacturer checks the quality of the work through detailed photographs and other control elements included in the certification procedure.

Once this process has been completed satisfactorily, AST issues the corresponding documentation for the installed structure.

Compatibility with FIA Appendix J

Many references in the AST Motorsport range have been designed following the requirements of FIA Appendix J, one of the benchmark standards for competition car safety.

Exact compatibility will depend on the vehicle model and the specific configuration selected, so it is always advisable to check the technical requirements applicable to each championship.

AST Roll Cages for professional competition

AST Motorsport Weld-In roll cages are aimed at drivers and teams who want the highest level of safety and structural performance. Thanks to their specific design and the possibility of creating complex configurations, they are one of the most advanced solutions available for competition vehicles.

If you are looking for a homologable structure designed specifically for your vehicle and prepared for the most demanding requirements of motorsport, the AST Motorsport Weld-In range is the most advanced option in the AST Roll Cages catalogue.

More information about AST Roll Cages