AST Motorsport Bolt-In: removable FIA roll cages for competition
The AST Motorsport Bolt-In are part of the Motorsport range of AST Roll Cages, developed for competition vehicles that must meet the safety requirements set by FIA regulations.
These structures are designed for rally, circuit, hill climb, time attack, slalom and other disciplines where driver safety and the structural stiffness of the vehicle are essential.
If you are looking for general information about the brand and the different configurations available, we recommend our complete guide to AST Roll Cages.
What is an AST Motorsport Bolt-In?
An AST Motorsport Bolt-In is a complete 6-point roll structure designed for competition vehicles under FIA regulations.
Unlike the Weld-In models, the structure is supplied fully factory-welded and split into several elements that are joined with high-strength sleeves.
This system allows the structure to be taken into the vehicle and the final fitting to be done without welding the cage itself.
AST Motorsport Bolt-In cages are a very popular solution in rally vehicles, advanced track days and competitions that require a structure homologable under FIA Appendix J.
Differences between AST Bolt-In and AST Weld-In
| AST Bolt-In | AST Weld-In |
|---|---|
| Factory-welded cage | Kit of bars for welding |
| Fitted with sleeves | Fitted by full welding |
| Certification included | Certification after installation |
| Quicker installation | Greater freedom to customise |
| Ideal for rallying and amateur competition | Aimed at professional competition |
If you are looking for a simpler structure for occasional sporty use, you can also see the range AST Track Day.
Advantages of AST Motorsport Bolt-In
- Specific design for each vehicle.
- Compliance with FIA Appendix J requirements.
- Made using a 3D scan of the cabin.
- Excelente ajuste interior.
- Large increase in structural stiffness.
- Superior protection in an accident.
- Compatibility with harnesses and HANS systems.
- Documentation included for Bolt-In models.
Materials and manufacture
AST Motorsport Bolt-In structures are made of cold-drawn E355 steel without a longitudinal weld seam.
This material offers an excellent combination of mechanical strength, energy absorption and low weight, meeting the requirements of competition.
The bolts used are high-strength and meet the standards required for motorsport applications.
Fitting an AST Motorsport Bolt-In
Although the main structure is supplied fully welded, fitting requires specialist work.
To fix the cage, the reinforcement plates must first be welded to the bodyshell, onto which the structure will then be bolted.
Depending on the vehicle, it may be necessary to remove:
- Salpicadero.
- Moqueta.
- Guarnecidos.
- Front and rear seats.
- Cinturones.
- Paneles interiores.
- Cristales.
For this reason we always recommend having the installation carried out by professionals specialised in competition vehicles.
Compatibility with HANS and harnesses
All AST Motorsport Bolt-In cages include a specific bar for fitting competition harnesses.
This allows the use of HANS systems and the safety configurations commonly used in rallies, circuit racing and FIA events.
Normativa FIA Appendix J
The AST Roll Cages Motorsport range has been developed following the specifications in FIA Appendix J, the technical document used by the Fédération Internationale de l'Automobile to regulate safety requirements in competition.
Depending on the vehicle and the sporting category, the structure can meet different technical requirements set by the FIA or by the championship organiser.
Documentation and homologation
AST Motorsport Bolt-In cages include the corresponding documentation inside the product packaging.
This documentation certifies the technical characteristics of the structure and, where applicable, compliance with the FIA Appendix J requirements for the specified vehicle model.
For Weld-In models the procedure is different, as the final certification is issued once the installation is complete and the quality of the welds has been checked.
Frequently asked questions about AST Motorsport Bolt-In
Are the roll cages painted?
No. The structures are supplied unpainted to avoid damage in transport and to make the final finish easier once the cage has been fitted.
Does the dashboard need to be removed?
Yes. In most Bolt-In configurations the dashboard has to be removed and adapted for a correct installation.
Are they compatible with the rear seats?
No. AST Roll Cages are designed for sporting use and competition, so they remove the use of the rear seats.
Can I fit the structure myself?
Although it is technically possible, AST recommends that installation be carried out by professionals experienced in competition vehicles and structural welding.
Do they comply with FIA regulations?
AST Motorsport structures are designed following the requirements of FIA Appendix J and may come with the corresponding documentation depending on the model and application.
Buy your AST Motorsport Bolt-In at BBSport
At BBSport you will find one of the largest selections of AST Roll Cages for rally, circuit and competition vehicles.
You can see all the available models in our main category of AST Roll Cages and find out the differences between the Track Day, Bolt-In, Weld-In and Multipoint ranges.