AST Weld-In V2 FIA weld-in roll cage Toyota MRS SW30 Roadster 2-door (from 1999)
search
  • AST Weld-In V2 FIA weld-in roll cage Toyota MRS SW30 Roadster 2-door (from 1999)
  • AST Weld-In V2 FIA weld-in roll cage Toyota MRS SW30 Roadster 2-door (from 1999)

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Weld-In V2 FIA weld-in roll cage Toyota MRS SW30 Roadster 2-door (from 1999)

€945.74 (Tax included)
LEAD TIME AND CONDITIONSDelivery time 6 to 7 weeks. The entire AST Roll Cages catalogue is made to order for each purchase. If you need to receive the product by a specific date, please check availability before ordering; otherwise we will understand that you are in no hurry and we will not commit to a delivery date. Limited right of withdrawal: product made to order only (see the terms of sale). By purchasing this item you accept our terms of sale.

AST Weld-In V2 FIA weld-in roll cage Toyota MRS SW30 Roadster 2-door (from 1999)

AST Weld-In V2 FIA weld-in roll cage for Toyota MRS SW30 Roadster 2-door (from 1999): competition structure designed to FIA Appendix J for rallying, circuit racing and hill climbs. 8 mounting points, weld-in tube kit, E355 steel (main hoop Ø 45 mm, other tubes Ø 40 mm).

Choose the configuration in the drop-down (roof type): the AST reference adjusts automatically.

Made to measure by AST Roll Cages in Zaragoza (Spain), based on a laser scan of the bodyshell. Data for each reference and the presentation video are in the «Technical data» tab.

Product reference: CMBN04578
End of structure: Boot area
Design type: X-Design
Roof type: Hard top
Quantity

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Weld-In V2 FIA weld-in roll cage Toyota MRS SW30 Roadster 2-door (from 1999)

The AST Weld-In V2 for the Toyota MRS SW30 Roadster 2-door (from 1999) is a structure from the Motorsport range, designed and built to FIA Appendix J for cars competing in rallies, circuit racing, hill climbs or slalom. It is supplied as a kit of tubes cut and bent to measure, to be welded inside the cabin: a welded joint gives the chassis more stiffness than a bolted one.

AST Roll Cages laser-scans the bodyshell of each model and designs the structure in 3D, with CNC-cut base plates that follow the shape of the floor: the fit is exact and no tubes need to be adapted. It fits every engine version of the model, because it is anchored to the bodyshell.

Version V2: bar configuration

The Weld-In V2 is like the V1, with two X-braces in the doors, a cross in the rear hoop and a longitudinal roof bar.

Weld-In versions for Toyota MRS SW30 Roadster 2-door

The higher the version number, the more reinforcement bars, the more stiffness and the more weight. Compare and choose:

VersionBar configurationApprox. weightMinimum FIA configuration for
V2 (this product)Like the V1, with two X-braces in the doors, a cross in the rear hoop and a longitudinal roof bar45 kghomologation forms before 01/01/2002
V3Like the V1, with two X-braces in the doors, a roof reinforcement cross and a cross in the main hoop and in the rear hoop48 kghomologation forms from 2002 to 2005
V4Like the V3, with A-pillar reinforcements (front pillars)52 kghomologation forms from 2006
V5Like the V4, with two rear side reinforcements: the most complete version59 kghomologation forms from 2006 (exceeds the minimum configuration)

The minimum configuration required by the FIA depends on the date of your car's FIA homologation form (AST guide table). Each championship's regulations may require more: check with your national motorsport federation before choosing.

Technical data

Structure typeFIA weld-in roll cage (Weld-In)
AST rangeMotorsport FIA
VersionV2
VehicleToyota MRS SW30 Roadster 2-door (from 1999)
Mounting points8
Supplied askit of bent tubes cut to measure, for welding, unpainted
Attachment to the bodyshellwelded; made-to-measure 3 mm steel floor plates
MaterialE355 steel
Tube diametermain hoop Ø 45 mm; other tubes Ø 40 mm
Rear / roof designX-shaped (X-Design)
End of the structurein the boot area
Roofwith factory hard top
Approximate weight45 kg
Standarddesigned and built to FIA Appendix J
Manufactured byAST Roll Cages, Torres de Berrellén (Zaragoza, Spain)

The drop-down options (sunroof, roof lining, design or end of the structure) change the AST reference; the «Technical data» tab shows the data for the selected option.

What's included

  • Weld-in kit.
  • Reinforcement gussets.
  • Reinforcement plates.
  • Bolts, washers and nuts.
  • Individual documentation.
  • Instruction manual.
  • Sticker set.

The structure is supplied unpainted. Harnesses, seats and tube padding are not included (sold separately).

Fitting, homologation and use

Designed to FIA Appendix J: check with your federation the requirements of your event's regulations and your car's homologation form. It is not suitable for road use. Some interior parts must be adapted or removed (dashboard, door panels, trim, rear seats). Welding must be done by a qualified welder: poor welding prevents you from obtaining the AST certificate and may invalidate the structure. If you cannot guarantee perfect welding, choose the Bolt-In version.

More information: AST Motorsport FIA range, Weld-In cages and bolt-in or weld-in roll cage: which to choose.

Frequently asked questions

Which version of the Weld-In should I choose?

For the Toyota MRS SW30 Roadster 2-door there are V2, V3, V4, V5. They all share the same mounting points and quality; what changes is the number of reinforcement bars, the stiffness and the weight (see the versions table). In competition, the minimum is set by the car's FIA homologation form and your championship's regulations.

Can it be road registered?

No. It is a competition structure for closed circuits; if you need to use the car on the road, look at the Track Day range for the same model.

Who should weld it?

A workshop with welders qualified in safety structures; AST has a network of fitting centres. The quality of the welding is key to certification.

Is it suitable if my car has a sunroof?

Check the roof option in the drop-down.

Does it fit any engine?

Yes: it is anchored to the bodyshell, so it fits every engine version of the Toyota MRS SW30 Roadster 2-door with this bodyshell.

Other AST structures for Toyota MRS SW30 Roadster 2-door

For the same car AST also makes: Bolt-In, Multipoint Weld-In, Multipoint Weld-In ASN, Removable Full Cage, Removable Rear Cage.

See all: FIA roll cages Toyota MRS SW30, Track Day roll cages Toyota MRS SW30 or the model page Toyota MR2 SW30 99- Sport Accessories.

Full catalogue: AST Roll Cages roll bars and roll cages.

AST Weld-In V2 FIA weld-in roll cage Toyota MRS SW30 Roadster 2-door (from 1999)
CMBN04578

Data sheet

Car make
Toyota
Modelos (Roll Cages)
MRS SW30 99-
Structure type
FIA weld-in roll cage (Weld-In)
AST range
Motorsport FIA
Version
V2
Bar configuration
Like the V1, with two X-braces in the doors, a cross in the rear hoop and a longitudinal roof bar
Mounting points
8
Supplied as
kit of bent tubes cut to measure, for welding, unpainted
Attachment to the bodyshell
welded; made-to-measure 3 mm steel floor plates
Material
E355 steel
Tube diameter
main hoop Ø 45 mm; other tubes Ø 40 mm
Rear / roof design
X-shaped (X-Design)
End of the structure
in the boot area
Roof
with factory hard top
Approximate weight
45 kg
Homologation
designed and built to FIA Appendix J (with individual AST documentation)
Minimum FIA configuration for
homologation forms before 01/01/2002
Road use
no (not road legal)
Contents
  • Weld-in kit
  • Reinforcement gussets
  • Reinforcement plates
  • Bolts, washers and nuts
  • Individual documentation
  • Instruction manual
  • Sticker set
Manufactured by
AST Roll Cages, Torres de Berrellén (Zaragoza, Spain)
Comments (0)
No customer reviews for the moment.