AST Weld-In V1 FIA weld-in roll cage Opel Corsa D 3-door (2006-2014)
search
  • AST Weld-In V1 FIA weld-in roll cage Opel Corsa D 3-door (2006-2014)
  • AST Weld-In V1 FIA weld-in roll cage Opel Corsa D 3-door (2006-2014)

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Weld-In V1 FIA weld-in roll cage Opel Corsa D 3-door (2006-2014)

€688.56 (Tax included)
LEAD TIME AND CONDITIONSDelivery time 6 to 7 weeks. The entire AST Roll Cages catalogue is made to order for each purchase. If you need to receive the product by a specific date, please check availability before ordering; otherwise we will understand that you are in no hurry and we will not commit to a delivery date. Limited right of withdrawal: product made to order only (see the terms of sale). By purchasing this item you accept our terms of sale.

AST Weld-In V1 FIA weld-in roll cage Opel Corsa D 3-door (2006-2014)

AST Weld-In V1 FIA weld-in roll cage for Opel Corsa D 3-door (2006-2014): competition structure designed to FIA Appendix J for rallying, circuit racing and hill climbs. 8 mounting points, weld-in tube kit, E355 steel (main hoop Ø 45 mm, other tubes Ø 40 mm).

Made to measure by AST Roll Cages in Zaragoza (Spain), based on a laser scan of the bodyshell. Data for each reference and the presentation video are in the «Technical data» tab.

Product reference: CMBN05696
End of structure: Rear wheel arch
Roof lining: Without roof lining
Sunroof: Without sunroof
Quantity

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Weld-In V1 FIA weld-in roll cage Opel Corsa D 3-door (2006-2014)

The AST Weld-In V1 for the Opel Corsa D 3-door (2006-2014) is a structure from the Motorsport range, designed and built to FIA Appendix J for cars competing in rallies, circuit racing, hill climbs or slalom. It is supplied as a kit of tubes cut and bent to measure, to be welded inside the cabin: a welded joint gives the chassis more stiffness than a bolted one.

AST Roll Cages laser-scans the bodyshell of each model and designs the structure in 3D, with CNC-cut base plates that follow the shape of the floor: the fit is exact and no tubes need to be adapted. It fits every engine version of the model, because it is anchored to the bodyshell.

Version V1: bar configuration

The Weld-In V1 is the basic structure: single side bars in the doors and a rear horizontal bar to anchor the harnesses.

Weld-In versions for Opel Corsa D 3-door

The higher the version number, the more reinforcement bars, the more stiffness and the more weight. Compare and choose:

VersionBar configurationApprox. weightMinimum FIA configuration for
V1 (this product)The basic structure: single side bars in the doors and a rear horizontal bar to anchor the harnesses32 kghomologation forms before 01/01/2002
V2Like the V1, with two X-braces in the doors, a cross in the rear hoop and a longitudinal roof bar45 kghomologation forms before 01/01/2002
V3Like the V1, with two X-braces in the doors, a roof reinforcement cross and a cross in the main hoop and in the rear hoop48 kghomologation forms from 2002 to 2005
V4Like the V3, with A-pillar reinforcements (front pillars)52 kghomologation forms from 2006
V5Like the V4, with two rear side reinforcements: the most complete version59 kghomologation forms from 2006 (exceeds the minimum configuration)

The minimum configuration required by the FIA depends on the date of your car's FIA homologation form (AST guide table). Each championship's regulations may require more: check with your national motorsport federation before choosing.

Technical data

Structure typeFIA weld-in roll cage (Weld-In)
AST rangeMotorsport FIA
VersionV1
VehicleOpel Corsa D 3-door (2006-2014)
Mounting points8
Supplied askit of bent tubes cut to measure, for welding, unpainted
Attachment to the bodyshellwelded; made-to-measure 3 mm steel floor plates
MaterialE355 steel
Tube diametermain hoop Ø 45 mm; other tubes Ø 40 mm
End of the structureat the rear wheel arch
Sunroofwithout sunroof
Approximate weight32 kg
Standarddesigned and built to FIA Appendix J
Manufactured byAST Roll Cages, Torres de Berrellén (Zaragoza, Spain)

What's included

  • Weld-in kit.
  • Reinforcement gussets.
  • Reinforcement plates.
  • Bolts, washers and nuts.
  • Individual documentation.
  • Instruction manual.
  • Sticker set.

The structure is supplied unpainted. Harnesses, seats and tube padding are not included (sold separately).

Fitting, homologation and use

Designed to FIA Appendix J: check with your federation the requirements of your event's regulations and your car's homologation form. It is not suitable for road use. Some interior parts must be adapted or removed (dashboard, door panels, trim, rear seats). Welding must be done by a qualified welder: poor welding prevents you from obtaining the AST certificate and may invalidate the structure. If you cannot guarantee perfect welding, choose the Bolt-In version.

More information: AST Motorsport FIA range, Weld-In cages and bolt-in or weld-in roll cage: which to choose.

Frequently asked questions

Which version of the Weld-In should I choose?

For the Opel Corsa D 3-door there are V1, V2, V3, V4, V5. They all share the same mounting points and quality; what changes is the number of reinforcement bars, the stiffness and the weight (see the versions table). In competition, the minimum is set by the car's FIA homologation form and your championship's regulations.

Can it be road registered?

No. It is a competition structure for closed circuits; if you need to use the car on the road, look at the Track Day range for the same model.

Who should weld it?

A workshop with welders qualified in safety structures; AST has a network of fitting centres. The quality of the welding is key to certification.

Is it suitable if my car has a sunroof?

This reference is for cars without a sunroof; if yours has one, contact us.

Does it fit any engine?

Yes: it is anchored to the bodyshell, so it fits every engine version of the Opel Corsa D 3-door with this bodyshell.

Other AST structures for Opel Corsa D 3-door

For the same car AST also makes: Bolt-In, Full Cage, Multipoint Weld-In, Rear Cage.

See all: FIA roll cages Opel Corsa D, Track Day roll cages Opel Corsa D or the model page Opel Corsa D Sport Accessories.

Full catalogue: AST Roll Cages roll bars and roll cages.

AST Weld-In V1 FIA weld-in roll cage Opel Corsa D 3-door (2006-2014)
CMBN05696

Data sheet

Car make
Opel
Modelos (Roll Cages)
Corsa D 06-14
Structure type
FIA weld-in roll cage (Weld-In)
AST range
Motorsport FIA
Version
V1
Bar configuration
The basic structure: single side bars in the doors and a rear horizontal bar to anchor the harnesses
Mounting points
8
Supplied as
kit of bent tubes cut to measure, for welding, unpainted
Attachment to the bodyshell
welded; made-to-measure 3 mm steel floor plates
Material
E355 steel
Tube diameter
main hoop Ø 45 mm; other tubes Ø 40 mm
End of the structure
at the rear wheel arch
Sunroof
without sunroof
Roof lining
without roof lining
Approximate weight
32 kg
Homologation
designed and built to FIA Appendix J (with individual AST documentation)
Minimum FIA configuration for
homologation forms before 01/01/2002
Road use
no (not road legal)
Contents
  • Weld-in kit
  • Reinforcement gussets
  • Reinforcement plates
  • Bolts, washers and nuts
  • Individual documentation
  • Instruction manual
  • Sticker set
Manufactured by
AST Roll Cages, Torres de Berrellén (Zaragoza, Spain)
Comments (0)
No customer reviews for the moment.