AST Multipoint Weld-In V2 FIA multipoint roll cage Honda Civic MK7 EP2 / Civic Type R EP3 3-door
search
  • AST Multipoint Weld-In V2 FIA multipoint roll cage Honda Civic MK7 EP2 / Civic Type R EP3 3-door
  • AST Multipoint Weld-In V2 FIA multipoint roll cage Honda Civic MK7 EP2 / Civic Type R EP3 3-door

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Multipoint Weld-In V2 FIA multipoint roll cage Honda Civic MK7 EP2 / Civic Type R EP3 3-door

€1,129.62 (Tax included)
LEAD TIME AND CONDITIONSDelivery time 6 to 7 weeks. The entire AST Roll Cages catalogue is made to order for each purchase. If you need to receive the product by a specific date, please check availability before ordering; otherwise we will understand that you are in no hurry and we will not commit to a delivery date. Limited right of withdrawal: product made to order only (see the terms of sale). By purchasing this item you accept our terms of sale.

AST Multipoint Weld-In V2 FIA multipoint roll cage Honda Civic MK7 EP2 / Civic Type R EP3 3-door

AST Multipoint Weld-In V2 FIA multipoint roll cage for Honda Civic MK7 EP2 / Civic Type R EP3 3-door: competition structure designed to FIA Appendix J for rallying, circuit racing and hill climbs. 10 mounting points, weld-in tube kit, E355 steel (main hoop Ø 45 mm, other tubes Ø 40 mm).

Made to measure by AST Roll Cages in Zaragoza (Spain), based on a laser scan of the bodyshell. Data for each reference and the presentation video are in the «Technical data» tab.

Product reference: CMBN04800
End of structure: Rear suspension area
Roof lining: Without roof lining
Sunroof: Without sunroof
Design type: X-Design
Quantity

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Multipoint Weld-In V2 FIA multipoint roll cage Honda Civic MK7 EP2 / Civic Type R EP3 3-door

The AST Multipoint Weld-In V2 for the Honda Civic MK7 EP2 / Civic Type R EP3 3-door is a structure from the Motorsport range, designed and built to FIA Appendix J for cars competing in rallies, circuit racing, hill climbs or slalom. It is the multipoint variant: more points welded to the bodyshell, with extensions to the suspension turrets, for categories that require more stiffness.

AST Roll Cages laser-scans the bodyshell of each model and designs the structure in 3D, with CNC-cut base plates that follow the shape of the floor: the fit is exact and no tubes need to be adapted. It fits every engine version of the model, because it is anchored to the bodyshell.

Version V2: bar configuration

The Multipoint Weld-In V2 is like the V1, with two X-braces in the doors and a longitudinal roof bar.

Multipoint Weld-In versions for Honda Civic MK7 EP2 / Civic Type R EP3 3-door

The higher the version number, the more reinforcement bars, the more stiffness and the more weight. Compare and choose:

VersionBar configurationApprox. weightMinimum FIA configuration for
V1The basic multipoint structure: single side bars, a cross in the rear hoop, double harness bar, rear side reinforcements and attachments to the front and rear suspension turrets39 kghomologation forms before 01/01/2002
V2 (this product)Like the V1, with two X-braces in the doors and a longitudinal roof bar52 kghomologation forms before 01/01/2002
V3Like the V1, with two X-braces in the doors, a roof reinforcement cross, A-pillar reinforcements and a cross in the main hoop and in the rear hoop59 kgany homologation date or cars without an FIA form
V4Like the V3, with a dashboard reinforcement66 kgany homologation date or cars without an FIA form
V5Like the V4, with a lower rear diagonal bar: the most complete version69 kgany homologation date or cars without an FIA form

The minimum configuration required by the FIA depends on the date of your car's FIA homologation form (AST guide table). Each championship's regulations may require more: check with your national motorsport federation before choosing.

Technical data

Structure typeFIA multipoint roll cage (Multipoint Weld-In)
AST rangeMotorsport FIA
VersionV2
VehicleHonda Civic MK7 EP2 / Civic Type R EP3 3-door
Mounting points10
Supplied askit of bent tubes cut to measure, for welding, unpainted
Attachment to the bodyshellwelded; made-to-measure 3 mm steel floor plates
MaterialE355 steel
Tube diametermain hoop Ø 45 mm; other tubes Ø 40 mm
Rear / roof designX-shaped (X-Design)
End of the structureat the rear suspension area
Sunroofwithout sunroof
Approximate weight52 kg
Standarddesigned and built to FIA Appendix J
Manufactured byAST Roll Cages, Torres de Berrellén (Zaragoza, Spain)

What's included

  • Weld-in kit.
  • Reinforcement gussets.
  • Reinforcement plates.
  • Bolts, washers and nuts.
  • Individual documentation.
  • Instruction manual.
  • Sticker set.

The structure is supplied unpainted. Harnesses, seats and tube padding are not included (sold separately).

Fitting, homologation and use

Designed to FIA Appendix J: check with your federation the requirements of your event's regulations and your car's homologation form. It is not suitable for road use. Some interior parts must be adapted or removed (dashboard, door panels, trim, rear seats). Welding must be done by a qualified welder: poor welding prevents you from obtaining the AST certificate and may invalidate the structure. If you cannot guarantee perfect welding, choose the Bolt-In version.

More information: AST Motorsport FIA range, Weld-In cages and bolt-in or weld-in roll cage: which to choose.

Frequently asked questions

Which version of the Multipoint Weld-In should I choose?

For the Honda Civic MK7 EP2 / Civic Type R EP3 3-door there are V1, V2, V3, V4, V5. They all share the same mounting points and quality; what changes is the number of reinforcement bars, the stiffness and the weight (see the versions table). In competition, the minimum is set by the car's FIA homologation form and your championship's regulations.

Can it be road registered?

No. It is a competition structure for closed circuits; if you need to use the car on the road, look at the Track Day range for the same model.

Who should weld it?

A workshop with welders qualified in safety structures; AST has a network of fitting centres. The quality of the welding is key to certification.

Is it suitable if my car has a sunroof?

This reference is for cars without a sunroof; if yours has one, contact us.

Does it fit any engine?

Yes: it is anchored to the bodyshell, so it fits every engine version of the Honda Civic MK7 EP2 / Civic Type R EP3 3-door with this bodyshell.

Other AST structures for Honda Civic MK7 EP2 / Civic Type R EP3 3-door

For the same car AST also makes: Bolt-In, Removable Full Cage, Removable Rear Cage, Weld-In.

See all: FIA roll cages Honda Civic EP, Track Day roll cages Honda Civic EP or the model page Honda Civic VII EP-EM-ES-EU-EV.

Full catalogue: AST Roll Cages roll bars and roll cages.

AST Multipoint Weld-In V2 FIA multipoint roll cage Honda Civic MK7 EP2 / Civic Type R EP3 3-door
CMBN04800

Data sheet

Car make
Honda
Modelos (Roll Cages)
Civic MK7 EP2 01-05
Civic Type R EP3 01-05
Structure type
FIA multipoint roll cage (Multipoint Weld-In)
AST range
Motorsport FIA
Version
V2
Bar configuration
Like the V1, with two X-braces in the doors and a longitudinal roof bar
Mounting points
10
Supplied as
kit of bent tubes cut to measure, for welding, unpainted
Attachment to the bodyshell
welded; made-to-measure 3 mm steel floor plates
Material
E355 steel
Tube diameter
main hoop Ø 45 mm; other tubes Ø 40 mm
Rear / roof design
X-shaped (X-Design)
End of the structure
at the rear suspension area
Sunroof
without sunroof
Roof lining
without roof lining
Approximate weight
52 kg
Homologation
designed and built to FIA Appendix J (with individual AST documentation)
Minimum FIA configuration for
homologation forms before 01/01/2002
Road use
no (not road legal)
Contents
  • Weld-in kit
  • Reinforcement gussets
  • Reinforcement plates
  • Bolts, washers and nuts
  • Individual documentation
  • Instruction manual
  • Sticker set
Manufactured by
AST Roll Cages, Torres de Berrellén (Zaragoza, Spain)
Comments (0)
No customer reviews for the moment.