AST Bolt-In V2 FIA bolt-in roll cage Fiat 124 Sedan 4-door (1966-1974)
search
  • AST Bolt-In V2 FIA bolt-in roll cage Fiat 124 Sedan 4-door (1966-1974)
  • AST Bolt-In V2 FIA bolt-in roll cage Fiat 124 Sedan 4-door (1966-1974)

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Bolt-In V2 FIA bolt-in roll cage Fiat 124 Sedan 4-door (1966-1974)

€1,491.87 (Tax included)
LEAD TIME AND CONDITIONSDelivery time 6 to 7 weeks. The entire AST Roll Cages catalogue is made to order for each purchase. If you need to receive the product by a specific date, please check availability before ordering; otherwise we will understand that you are in no hurry and we will not commit to a delivery date. Limited right of withdrawal: product made to order only (see the terms of sale). By purchasing this item you accept our terms of sale.

AST Bolt-In V2 FIA bolt-in roll cage Fiat 124 Sedan 4-door (1966-1974)

AST Bolt-In V2 FIA bolt-in roll cage for Fiat 124 Sedan 4-door (1966-1974): competition structure designed to FIA Appendix J for rallying, circuit racing and hill climbs. 6 mounting points, pre-welded structure, removable with joining sleeves, E355 steel (main hoop Ø 45 mm, other tubes Ø 40 mm).

Made to measure by AST Roll Cages in Zaragoza (Spain), based on a laser scan of the bodyshell. Data for each reference and the presentation video are in the «Technical data» tab.

Product reference: CMBN04920
End of structure: Rear wheel arch
Roof lining: Without roof lining
Sunroof: Without sunroof
Design type: X-Design
Quantity

SHOP WITH COMPLETE PEACE OF MIND

Sara Order follow-up commitment Once you order, we follow it up with the supplier and keep you informed by email and WhatsApp until delivery.
GUARANTEED REFUND IF WE CANNOT SUPPLY IT If, when processing your order, an item is out of stock or something prevents us from supplying it, we refund 100% of the amount paid.
SECURE PAYMENT Encrypted payment gateway: BBSport never sees or stores your card details.
OFFICIAL MANUFACTURER WARRANTY Genuine parts with each brand's warranty and technical advice before you buy.
SPANISH COMPANY SINCE 1951 Ballestas Barcelona S.L. · CIF B63874424 · Calle Tallers 8, 08160 Montmeló (Barcelona)

AST Bolt-In V2 FIA bolt-in roll cage Fiat 124 Sedan 4-door (1966-1974)

The AST Bolt-In V2 for the Fiat 124 Sedan 4-door (1966-1974) is a structure from the Motorsport range, designed and built to FIA Appendix J for cars competing in rallies, circuit racing, hill climbs or slalom. It is supplied pre-welded and bolts onto reinforcement plates that are welded to the chassis: the cage does not have to be welded inside the car.

AST Roll Cages laser-scans the bodyshell of each model and designs the structure in 3D, with CNC-cut base plates that follow the shape of the floor: the fit is exact and no tubes need to be adapted. It fits every engine version of the model, because it is anchored to the bodyshell.

Version V2: bar configuration

The Bolt-In V2 is like the V1, with two X-braces in the doors.

Bolt-In versions for Fiat 124 Sedan 4-door

The higher the version number, the more reinforcement bars, the more stiffness and the more weight. Compare and choose:

VersionBar configurationApprox. weightMinimum FIA configuration for
V1The basic structure: single side bars in the doors and a rear horizontal bar to anchor the harnesses35 kghomologation forms before 01/01/2002
V2 (this product)Like the V1, with two X-braces in the doors52 kghomologation forms before 01/01/2002
V3Like the V1, with two X-braces in the doors and a diagonal roof reinforcement55 kghomologation forms from 2002 to 2005
V4Like the V1, with two X-braces in the doors, a roof reinforcement cross, an X-brace in the main hoop and in the rear hoop and A-pillar reinforcements (front pillars)59 kghomologation forms from 2006

The minimum configuration required by the FIA depends on the date of your car's FIA homologation form (AST guide table). Each championship's regulations may require more: check with your national motorsport federation before choosing.

Technical data

Structure typeFIA bolt-in roll cage (Bolt-In)
AST rangeMotorsport FIA
VersionV2
VehicleFiat 124 Sedan 4-door (1966-1974)
Mounting points6
Supplied aswelded structure, unpainted, in several parts joined with sleeves (removable)
Attachment to the bodyshellbolted onto 6 steel plates of 3 mm that are welded to the bodyshell
MaterialE355 steel
Tube diametermain hoop Ø 45 mm; other tubes Ø 40 mm
Rear / roof designX-shaped (X-Design)
End of the structureat the rear wheel arch
Sunroofwithout sunroof
Approximate weight52 kg
Versions with FIA homologationFIAT 124 1200
Standarddesigned and built to FIA Appendix J
Manufactured byAST Roll Cages, Torres de Berrellén (Zaragoza, Spain)

What's included

  • Welded structure.
  • Joining sleeves.
  • Reinforcement plates.
  • Bolts, washers and nuts.
  • Individual documentation.
  • Instruction manual.
  • Sticker set.

The structure is supplied unpainted. Harnesses, seats and tube padding are not included (sold separately).

Fitting, homologation and use

Designed to FIA Appendix J: check with your federation the requirements of your event's regulations and your car's homologation form. It is not suitable for road use. Some interior parts must be adapted or removed (dashboard, door panels, trim, rear seats). Only the reinforcement plates need to be welded to the bodyshell; the cage is bolted onto them and joined with FIA sleeves.

More information: AST Motorsport FIA range, Bolt-In cages and bolt-in or weld-in roll cage: which to choose.

Frequently asked questions

Which version of the Bolt-In should I choose?

For the Fiat 124 Sedan 4-door there are V1, V2, V3, V4. They all share the same mounting points and quality; what changes is the number of reinforcement bars, the stiffness and the weight (see the versions table). In competition, the minimum is set by the car's FIA homologation form and your championship's regulations.

Can it be road registered?

No. It is a competition structure for closed circuits; if you need to use the car on the road, look at the Track Day range for the same model.

Does anything need welding?

Only the reinforcement plates to the bodyshell; the cage arrives welded in two parts and is bolted in.

Is it suitable if my car has a sunroof?

This reference is for cars without a sunroof; if yours has one, contact us.

Does it fit any engine?

Yes: it is anchored to the bodyshell, so it fits every engine version of the Fiat 124 Sedan 4-door with this bodyshell.

Other AST structures for Fiat 124 Sedan 4-door

For the same car AST also makes: Multipoint Weld-In, Removable Full Cage, Removable Rear Cage, Weld-In.

See all: FIA roll cages Fiat 124, Track Day roll cages Fiat 124 or the model page Fiat 124 4 doors.

Full catalogue: AST Roll Cages roll bars and roll cages.

AST Bolt-In V2 FIA bolt-in roll cage Fiat 124 Sedan 4-door (1966-1974)
CMBN04920

Data sheet

Car make
Fiat
Modelos (Roll Cages)
124 66-74
Structure type
FIA bolt-in roll cage (Bolt-In)
AST range
Motorsport FIA
Version
V2
Bar configuration
Like the V1, with two X-braces in the doors
Mounting points
6
Supplied as
welded structure, unpainted, in several parts joined with sleeves (removable)
Attachment to the bodyshell
bolted onto 6 steel plates of 3 mm that are welded to the bodyshell
Material
E355 steel
Tube diameter
main hoop Ø 45 mm; other tubes Ø 40 mm
Rear / roof design
X-shaped (X-Design)
End of the structure
at the rear wheel arch
Sunroof
without sunroof
Roof lining
without roof lining
Approximate weight
52 kg
Homologation
designed and built to FIA Appendix J (with individual AST documentation)
Versions with FIA homologation
FIAT 124 1200
Minimum FIA configuration for
homologation forms before 01/01/2002
Road use
no (not road legal)
Contents
  • Welded structure
  • Joining sleeves
  • Reinforcement plates
  • Bolts, washers and nuts
  • Individual documentation
  • Instruction manual
  • Sticker set
Manufactured by
AST Roll Cages, Torres de Berrellén (Zaragoza, Spain)
Comments (0)
No customer reviews for the moment.